This uses all white sanwa buttons including 4 OBSF-24KK buttons for the directions. This is modded with a TE Kitty for multi console support and also uses a Toodles SOCD cleaner. This required a custom metal panel and plexi from www.thegamesurgeons.com (no longer available 🙁 )
On top are 4 Seimitsu Purple screw-ins and below are 4 Sanwa smoke buttons. The button cutouts are too small at the moment but my artist is redoing them and I will update the pic when done.
Also, the FGwidget is wired backwards because OmegaXF is a Zero player and holding jab would initiate the config mode. Buttons are wired normally for play.
1 2 3 4
5 6 7 8 buttons
4 3 2 1
8 7 6 5 LEDs
This stick has a custom plexi with engraving and he opted for Sanwa smoke buttons. This is dual modded using a Toodles ChImp, and LED modded using a Toodles FGWidget and ArcEye 2’s wired only for red. I added a Sanwa black mesh balltop and Shadaloo aluminum feet as a finishing touch.
Add RGB LEDs to your stick or Hitbox using theToodles Remora (EXTREMELY LIMITED) or the Paradise Arcade Kaimana. Price ranges from $100 to $200 depending on if you have an 8 button arcade stick or a hitbox with 15+ buttons. Add $20 shipping. Combine with any dual mod and save $20!
ArcEye 3 and Remora
Kaimana
I can mod your fight stick to work on basically any console except for N64. The MC Cthulhu + Neutrik mod starts at $140 and cables for additional systems are $10 each. The cables are swappable using RJ-45 (ethernet) ends and plug into a hole that is drilled into your fight stick. Add Universal Compatibility (Next/Last Gen) for $140 more (bundle price only)!
Only play older games or want to add cheap PC support? I will add 360 and/or PS3 Support using a PS360+, Cerberus, or Madcatz TE/Fightpad PCB. Upgrade to Universal Compatibility for just $60 more!
I’ve modded the PS3 version of the Chun Li TE with the Remora. The Remora is designed for xbox due to the pinouts from the pcb. They do not match up with the pins on the Remora. I rewired the ribbons to match and, while messy, worked. First try, even! Here’s a video:
Just finished a few month long project for Danny:
-MC Cthulhu Mod with PS2 and PS3 compatibility
-Seimitsu Red Clear buttons
-ArcEye 2 Blue LEDs
-Toodles FGWidget LED Controller
-Sanwa Red Balltop
Here’s a video of it in action:
